SURFACE PROFILE

PRODUCTS

Elcometer 224 Digital Surface Profile Gauge

• • Digital, fast and accurate surface profile inspection on flat and curved surfaces.

• • Fast, accurate and very user friendly, the Elcometer 224 Surface Profile Gauge is available with or without memory and Bluetooth.

• • The Elcometer 224 surface profile meter is available in two different models: Model B and Model T. Each surface profile gauge provides the user with increasing functionality – from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth communication.

• • Standard and armoured probes are available for the separate models, providing even greater measurement flexibility. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils and an Elcometer Test Certificate.

Elcometer 123 Surface Profile Gauge

• • This easy to use gauge measures the peak-to-valley height of blasted cleaned surfaces.

• • The Elcometer 123 Surface Profile Gauge is an easy to use analogue gauge which measures the peak-to-valley height of a blast cleaned surface in a similar way to the Elcometer 224 Digital Surface Profile Gauge.

• • Metric and Imperial versions available.

Elcometer 122 Testex Replica Tape

• • Provides a permanent mould of the peak-to-valley profile.

• • The Elcometer 122 Testex Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.

• • Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

Elcometer 124 Thickness Gauge

• • Used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122.

• • The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex Replica Tape.

• • Available in both Metric and Imperial versions

• • Quick and easy to use

• • Anvil pressure as required in the Standards.

Elcometer 125 Surface Comparators

• • These extremely durable surface comparators allow the estimation of surface profile of either grit or shot blasted surfaces.

• • Using the Elcometer 125 surface comparators as a reference the blasted profile can be compared to the four reference profile grades in each comparator. Profiles are recorded in microns.

• • 4 Profile Values per Comparator.

Elcometer 127 Keane-Tator Surface Comparators & Magnifier

• • A range of Surface Comparators available in sand, shot or grit surface profiles.

• • The Elcometer 127 Surface Comparators are available in sand, shot or grit surface profiles.

• • Each surface comparator is supplied with 5 profile grades ranging from 0.5 – 5.5mils.

• • Designed for use with the Elcometer 127 illuminated magnifier, each surface comparator has a hole in the centre allowing for clear visual comparisons to be made.

• • 5 Roughness Values per Comparator.

Elcometer 129 Rubert & Rugotest Surface Comparator

• • A range of comparators available in grit and shot versions used to estimate surface roughness.